Columbia River Bear Claw E.R. - Blunt Tip - Serrated Edge
Russ Kommer is a bright young custom knifemaker who was based in Anchorage, Alaska, for many years. Conditions there are rugged, either from the climate or the work folks are doing. He thought a knife that was easy to grip and hard to lose would be a big hit, and since he made the first Bear Claw, he hasn't been able to meet the demand. His original concept was a self-defense knife for women that would be lightweight, easy to access and control. But it seems that every parachutist, bush pilot and commercial fisherman who sees one, wants one.
As a result, Russ and CRKT teamed up to make the production Bear Claw, a cutting machine that, thanks to the generous size finger hole, acts just like an extension of your hand. It is the perfect emergency cutting tool for anyone who needs to quickly cut rope, webbing or netting, especially if their life is going to depend on it.
The Bear Claw 2510ER is a profressional model which has a blunt tip and serrated edge, making it perfect for seat belt removal during emergency rescues and extrication from lines or nets in the water. The blade is full-tang, taper-ground AUS 4 stainless steel with a polished finish to resist corrosion. Friction grooves are placed on the blade spine, choil and near the tip for maximum blade control and safety. The contoured high visibility orange Zytel handle fills the hand neatly. The Bear Claw weighs in at a lightweight but stout 3.4 oz.
We developed one of our CRKT trademark high-tech sheaths for the Bear Claw that's only 1.1 oz. of tough, durable, injection-molded Zytel. It allows efficient quick release of the knifejust thumb push against the sheath to release smoothly and quietlyor give a sharp pull.
It features molded-in threaded fittings for attachment of the wide black stainless steel Teflon-plated pocket clip at either end, using the Torx tool and screws provided. The sheath also has a total of seven lanyard holes and belting slots to permit a variety of carry positions, and a lanyard is provided.
|Pocket Clip Included||Yes|
Columbia River Knife & Tool (CRKT), is a Tualatin, Oregon-based manufacturer of knives, tools, and accessories founded in 1994.
CRKT means Quality. All CRKT knives and tools are built incorporating the most advanced equipment and production systems available, and quality is controlled from beginning to end. Knives are built the way they should be builtÂwithout compromising quality in any part of their creation. CRKT accessories are crafted to the same standards as the knives, so that each sheath, for example, lives up to the customersÂ high expectations.
Sport & Work Knives
CRKT continues to "think outside the box" by seeking out new and unique designs and mechanisms, just when everyone in the industry thinks they have seen it all. For example, the company is introducing the tiny McGinnis Shrimp, the
Gekkota Pocket and Golf, the ExiTool, Ta-Bar Tool, Norfork Diver and Whitewater, and Klecker NIRKÂ all exciting and unusual. At the same time, it continues to broaden itÂs traditional knife models, including for the first time, Classic pocket knives, as well as the Centofante Tribute, Carson M4-02 series, and the Delegate and Vertex lines.
More natural and premium materials.
CRKT is continuing to specify the natural and premium materials that are common in the best custom knives, including more knives
with layered Micarta, G10, stag, jig bone, white bone, ram horn, and hardwoods such as thuya root, cocobolo, ebony, walnut, and burl.
CRKT Limited Lifetime Warranty: This warranty covers any defects in materials or workmanship. If one of our knives ever breaks or fails because of material or manufacturing defect, weÂll replace the knife. This warranty runs as long as you own your knife. Coverage ends if you sell or otherwise transfer the knife to someone else, or if your CRKT knife is modified in any way.
Looking for a way to give your knife an extra dash of pizzazz? At Knife Depot, you can customize any of our 10,000 knives with an inscription or logo. The cost is $19.99 per knife for up to three knives with the same inscription. If you want four or more knives with the same inscription or logo, it costs $5.99 per knife. Click here for more information about our engraved knives.
Want to get your engraved knife even faster? Our Quick Ship personalized knives program features a selection of popular knives that are ready to be engraved and shipped right away for less.
Got questions about our knife personalization? Give us a ring at 1-800-248-1987 or email us.
Be the first person to review this item! Write an online review and share your thoughts with other customers.